TKL LineBrace Vertical Pipe Support
Home » TKL LineBrace Vertical Pipe Support
Professional pipe support that is easy to install and prevents degradation.
The challenge: Vertical lineset installations are always subject to severe stress due to a combination of thermal expansion and gravity, usually resulting in buckling and deformation of the fittings at the lower end of each pipe run.
The solution: The “LineBrace” clamp supports the weight of vertical lineset risers in VRF/VRV AC systems and reduces the thermal expansion load on the lowest elbow by 50%.
FEATURES OF TKL LINEBRACE
REDUCED WEIGHT
The TKL LineBrace Pipe Support is attached to a copper riser using stainless steel. This attachment prevents galvanic corrosion and reduces the weight on the lowest fitting caused by the riser.
REDUCED THERMAL EXPANSION
TKL LineBrace reduces the load on system components. It is installed in the center of the vertical riser. This reduces the need for space.
EASY to INSTALL
The split pipe support clamp fits onto the riser and can be adjusted after installing any pipe system.
COMPATIBLE WITH MOST PIPES
Slotted holes on the mounting bracket allow for precise adjustments with many pipe sizes.
| Fixation Band | SUS304 |
|---|---|
| Nut Fixation Plates | PP |
| Hex Nuts | M8 SUS |
| Hex Bolts | M8 x 23L SUS |
