AP Duct Seal Putty is a flexible, moldable sealing compound ideal for creating airtight, waterproof seals around ductwork, electrical boxes, pipes, and wires. Made from a blend of clay, mineral fillers, and synthetic rubber, it conforms easily to irregular shapes. Its strong sealing properties prevent air leaks and moisture infiltration, enhancing HVAC efficiency and protecting electrical components. Non-toxic and safe for residential and commercial use.
AP Sealant Putty
AP Sealant Putty
Flexible, moldable putty for airtight, waterproof seals around ducts, wires, and pipes. Boosts efficiency and protects against moisture.
All weather, flame retardant non-drying putty with surperior adhesion. Temperature range: -41 F to 122 F. Working temperature: 41 F to 104 F Putty will harden below 41 F, always heat before use at this temperature.
| Code No. | Item No. | Color | Contents | Pcs/Pkg |
|---|---|---|---|---|
| C 0601 | AP-200 | Gray, Ivory, White | 7 oz | 100 |
| C 0602 | AP-1000 | Gray, Ivory, White | 35 oz | 20 |
Q. What is Sealant Putty AP used for?
A. Sealant Putty AP is designed for sealing around air conditioner installations to block gaps and prevent air or moisture intrusion.
Q. What sizes are available for Sealant Putty AP?
A. – AP-200_200 g (approx. 7 oz)
– AP-1000_1,000 g (approx. 35 oz)
Q. What materials is the putty made from?
A. It is made from a polybutene resin system and is a non-curable (non-drying) type sealant.
Q. What is the working temperature range?
A. – Working temperature_5°C to 40°C (41°F to 104°F)
– Storage/usage range_-20°C to 50°C (-4°F to 122°F)
Q. What happens if the temperature drops below 5°C?
A. The putty may harden. In that case, it should be warmed before use to restore pliability.
Q. Are there any precautions when using the putty on walls?
A. Yes, The oil in the putty may seep into wallpaper or wall surfaces. To prevent this, it is recommended to use it with Wall Cap (WC) or A/C Cap (AC) to avoid direct contact with walls.
Q. What color options are available?
A. The Sealant Putty AP is available in ivory and white.
Q. Should I wear protective gear when applying the putty?
A. Yes, it is recommended to wear working gloves during installation.
You May Also Be Interested In
-
HN Non-Adhesive Tape
PVC tape designed for use with Line Sets. Ideal for clean, secure wrapping and protection of HVAC lines without adhesive.
-
HV Adhesive Tape Thin Type
Thin, flexible PVC tape for HVAC sealing and insulation. Offers strong adhesion and resistance to moisture, abrasion, and temperature changes.
-
HY Non-Adhesive Tape Cling Wrap
Flexible, durable PVC tape designed for HVAC applications. Ideal for bundling, insulation, and protective wrapping where adhesion is not required.
-
UVT UV Resistant Adhesive Tape
UVT is durable PE tape designed for HVAC use. Offers strong adhesion, weatherproof sealing, and UV resistance for outdoor applications.
