SKU VD2100 Categories , , Tags , , Brand:
SKU VD2100 Categories , , Tags , , Brand:

VD Slimduct Cutter

Stainless steel blade delivers clean, debris-free cuts. One-touch open/close design for fast, easy use on Slimduct lineset covers..

The VD Slimduct Cutter provides clean, precise cutting of Slimduct lineset covers. Its stainless steel blade creates smooth, debris-free cuts, helping installers prepare cover sections with a controlled cutting action and a clean edge.

The light, slim body supports practical handling during installation, while the stainless steel blade provides advanced corrosion resistance. It has a one-touch open and close mechanism that simplifies operation. This lineset cover cutter is compatible with SD-77 and SD-100 Slimduct.

Request distributor quote

The Slimduct cutter boasts features like controlled cutting, a corrosion-resistant stainless steel blade, and compact handling for Slimduct installation work.

Light and Slim Design
The light, slim body makes the cutter easier to handle while positioning and cutting Slimduct. Its compact form supports controlled operation during lineset cover installation.

Stainless Steel Blade
The stainless steel blade provides a sharp cutting surface for clean, precise cuts. Its cutting action helps reduce debris while producing a cleaner edge on compatible Slimduct covers.

One-Touch Operation
The one-touch open and close mechanism provides a simple way to operate the cutter. Installers can open or close the tool without a complicated adjustment process.

Compatible Slimduct Sizes
The lineset cover cutter is suitable for SD-77 and SD-100 Slimduct. Using it with the designated sizes supports the cutting action for which the tool was developed.

Item No.Product Name
VD2100Slimduct Cutter
VD021Spare Blade

Applicable for SD-77, SD-100

Weight: 1.25 lbs

Size:

Length: 12-1/4″

Width: 3-5/8″

Thickness: 3/4″

Q: Which Slimduct Sizes Can You Cut With The VD Cutter?
A: You can use the cutter with SD-77 and SD-100 Slimduct. You should not use it to cut ducts outside the designated sizes because the tool is designed specifically for these compatible covers.

Q: How Should You Cut Slimduct in Low Temperatures?
A: You should cut the duct very slowly or warm it with hot air before cutting. This precaution helps reduce the possibility of the duct cracking when exposed to low temperatures.

Q: What Safety Precautions Should You Follow While Cutting?
A: Wear safety gloves and goggles or glasses while using the cutter. Keep your fingers and hands away from the sharp blade and moving parts during operation.

Q: Can The Cut Edge Become Slanted?
A: You may produce a slanted duct edge depending on the angle at which you make the cut. Maintaining a controlled cutting angle helps you achieve a more consistent edge.

Q: How Should You Handle The VD Slimduct Cutter?
A: Avoid throwing or dropping the cutter because impact can damage its body or blade receiver. Also, use the tool only for cutting designated Slimduct sizes.

Why Choose Inaba Denko

Inaba Denko is a leader in developing application-specific HVAC products and accessories, including this VD Slimduct cutter.

Designed for SD-77 and SD-100

This lineset cover cutter is developed specifically for SD-77 and SD-100.

Precise Cut Quality

The blade applies a controlled cutting action to the duct material, producing a smooth edge with less debris.

Practical Jobsite Operation

A light, slim body and one-touch mechanism simplify handling this lineset cover cutter during installation.

Supported By Inaba Denko America

Inaba Denko America provides product information and application support for all its products across North America.

Best Used For

The VD Slimduct Cutter is designed for preparing SD-77 and SD-100 Slimduct during lineset cover installation. Its stainless steel blade provides a controlled cutting surface for producing clean sections with less cutting debris. The light, slim body makes it easy to handle, while the one-touch mechanism simplifies opening and closing between cuts.

Use VD Slimduct Cutter to Simplify Lineset Cover Installation

The VD Cutter is purpose-built for preparing SD-77 and SD-100 Slimduct covers. It features a stainless steel blade and a one-touch operating mechanism. Contact Inaba Denko America for product information, Slimduct compatibility questions, or distributor assistance.

Talk to An Expert

You May Also Be Interested In

MD Cutter

MD Cutter

The Slimduct Lineset Cover Cutter features a durable stainless steel blade with corrosion resistance for...

lineset cover

SD Straight Duct Lineset Cover

The Slimduct SD Straight Duct neatly covers exposed linesets mounted on walls, providing a clean,...

SF Flexible Ell

SF Flexible Ell

The Slimduct SF Flexible Ell replaces long-radius 90° elbows, connecting directly to SD straight duct...

Our Support

Frequently Asked Questions

Our Support to Distributors

View Technical Library